FeCo-based hybrid MOF derived active species for effective oxygen evolution

Metal-organic frameworks(MOFs) have been regarded as promising catalyst materials due to the richness of coordinately unsaturated metal sites on the surface,which can act as catalytic active centres.In this study,a hybrid MOF material composed of Fe-based MOF and Co-based MOF was prepared with the involvement of graphene oxide nanosheets as additive.It was demonstrated that the hybrid MOF materials showed much higher electro-catalytic activity towards oxygen evolution than the single-phase counterparts.To drive current density of 10 mA cm~(-2),the hybrid CoFe-based MOF only needed an over potential of 290 mV in 1 M KOH.The catalytic activity could sustain for a longer time with only slight current density decrease.During oxygen evolution operation,the MOF catalyst evolved into catalytic active species but kept well the microscale sheet-like structure.It is thus believed that this study will provide an avenue for the development of advanced electrocatalysts.     

Acyl-chloride functionalized graphene oxide chemically grafted with hindered phenol and its application in anti-degradation of polypropylene

In this study,graphene oxide (GO) nanosheets were first functionalized by the acyl-chloride reaction and then reacted with hindered phenol (HP) to obtain HP grafted GO (GO-g-HP).The GO-g-HP prepared under the optimized condition exhibited a high efficiency against both thermal and photo oxidation of isotactic polypropylene (iPP).GO-g-HP exhibited a much better anti-aging efficiency than that of HP and GO used individually or that of their physical mixture.The outstanding anti-aging effect of GO-g-HP was attributed to the excellent synergistic effect produced between the chemically bonded GO and HP,which resulted in an improved oxygen barrier property of GO and excellent utilization of the free radical scavenging capability of GO and HP.Also,thanks to the grafting of HP on GO,the physical loss of HP,which was one of the main shortcomings for traditional small molecular antioxidants,was largely suppressed.It is expected that the GO-g-HP prepared can well meet the requirement of long-term applications of polymers in some harsh service conditions.     

丙酸盐对厌氧氨氧化除氮性能及群落结构的影响

为了探究有机碳对厌氧氨氧化的长期影响, 向厌氧氨氧化膜生物反应器中添加不同浓度的丙酸钠, 研究对反应器的除氮效能以及微生物的种群结构和功能变化。结果表明: 反应器主要的脱氮过程由CandidatusBrocadia完成, 当丙酸钠浓度为100 mg/L时, 反应器中由于异养细菌的生长, 可实现碳氮的同步去除, 平均总氮去除率可达91.9%。当丙酸钠浓度为200 mg/L 时, 对Candidatus Brocadia的抑制作用导致反应器除氮性能下降, Candidatus Brocadia的丰度降至41.2%, 总氮去除率降至 78.8%。在有机碳抑制作用解除后, 反应器的除氮性能恢复为86.8%, Candidatus Brocadia丰度增加到54.0%, 但群落多样性下降, 属水平的微生物组成有较大的改变。     

工程中常用的几种氧化沟及其发展

简要介绍了当今工程中常用的几种氧化沟技术的特点及其发展历程,主要包括Carrousel氧化沟、Orbal氧化沟、交替式氧化沟以及一体化氧化沟。     

pH、温度和浓度对苯酚在V掺杂MoOx-C/Ti电极上的电催化氧化的影响

采用溶胶-凝胶法合成MoOx、MoOx-V5 (x%)胶体,通过Vulcan XC-72炭黑负载制备炭载钼系氧化物电催化剂.利用循环伏安法(CV)测试手段研究苯酚在电极上的氧化降解,考察了掺杂元素、溶液pH值、苯酚浓度、扫描速率、温度对苯酚氧化性能的影响.测试结果表明:苯酚在电极上的氧化是受扩散和电子转移联合控制的复杂过程;掺杂过渡金属元素V可以降低苯酚氧化的表观活化能,提高电化学性能;溶液的pH值越低,MoOx-C/Ti电极对苯酚的催化氧化活性越高;pH在0～6,苯酚的氧化经历了相似的历程,包含了相同的电子数和质子数;苯酚氧化峰电流随着浓度、温度的增加而增加,到一定程度后趋于稳定.     

选择性催化氧化H2S的催化剂研究

在考察了几种单组分氧化物把硫化氢催化氧化为单质硫的基础上，采用共沉淀法合成了3种复合氧化物催化剂A，B，C，并考察了它们的催化活性和选择性．结果表明，在一定条件下，催化剂B的转化率和选择性分别在90％和97％以上，在40h的催化性能稳定性测试中，其转化率和选择性均能保持稳定，具有良好的催化性能．     

Fe_3Al的抗高温氧化和耐热腐蚀性能

在７００℃与８５０℃的高温下，Ｆｅ＿３Ａｌ金属间化合物表面形成了Ａｌ＿２Ｏ＿３保护膜，使其抗氧化性能远优于不妨钢，２％Ｃｒ（原子百分比）加入Ｆｅ＿３Ａｌ会导致氧化过程初期氧化速率的增高，在熔融的硫酸盐和高压锅炉的烟气中，Ｆｅ＿３Ａｌ的耐热腐蚀性能优于高温合金ＧＨ１３２．     

一种对有机废水间接氧化的膜气体扩散阴极

采用膜结构的气体扩散电解作为阴极对染料进行了脱色研究，对膜阴极(MEA)制备工艺以及催化剂进行了探讨，得到了制备MEA的适宜条件。结果表明，使用MEA作阴极，效果远远优于石墨阴极；铂是膜电极的高效催化剂；膜电极制备的优化条件是造孔剂的含量ω=0．30。     

水中酚的催化空气氧化研究

本文研究了水中酚在常压下的催化空气氧化过程。所采用的催化剂为以M_nO_2为主要成份的TGS—3型催化剂。苯酚氧化降解过程用高压液相色谱系统作了分析。同时,经过推导得到苯酚降解的动力学模型。